Model Number

RNCF5088

Intelligent wing turnstile is a high technical product which designed for intelligent management of access, is an update product of intelligent tripod turnstile and swing turnstile. The product is processing sophisticated, full-featured, high-grade, mainly used for high-grade communities, intelligent buildings, hotels, subways, terminals, clubs and other high-end places

Integrating mechanism, electronic with micro-processor as well as diversified technology of identity, easy integrate with IC card, ID card, barcode, fingerprint and so on identified devices.

This series can be classified into two types:
Single chassis: Can be used for single access or multi-access.
Double chassises: Can be used for multi-access.

2. Function and Characteristics
2.1 Function and Characteristics of Standard Product
1) With function of self-examine and alarm function, it is convenient for users to maintain and use.
2) Users can set the device working status through a small built-in keyboard on the main control panel.
3) Anti-grip feature, the arm will rebound or the motor stop working during the setting time when arm is blocked during the process of resetting, arm will resetting again after setting time, and the power is small (≤2Kg)
4) Light and sound alarm function: Includes trespassing, following alarm
5) Erosion control function: The mechanism is locked until a valid open signal is received
6) Arm elescopic synchronization
7) Reset automatically: User do not pass the gate within the setting time after the gate open, system will cancel this pass, the standard resetting is 5 seconds.
8) Unit can be adjusted normal open or close when power off, and close when power on to meet different needs.
9) It can be connected to many card systems, can work with receiving the signal of replay.
10) It can be set for single or double direction for access control.
11) Unit can be controlled and administered by remote control via management computer.

2.2 Extensible function:
Counting
Material of arms is optional, and the length of body of turnstile.

3 Main structure and device
Standard body of turnstile 2 pcs, Arm 2 pcs, Main control board 2 pcs, Transformer 2pcs, Motor 2 pcs, Chassis and driving motion parts 2 series, Infrared device: 3 pair
Alarm light: 2 pcs, LED induction panel: 3pcs

4 Technology Specification
Shape material: 304 Grade Stainless Steel
Dimension: Round angle 1400*300*1000(mm)
Weight: 140(kg)
Arm length: 285(mm)
Width of channel: 600mm
Interface: Standard port-RS485
Power voltage: AC220 (10%more or less) V, 50HZ
Drive motor: 24V Brush DC Motor
Normal available life: 3, 000, 000 times
LED induction light: 2 pcs
Window of card reader: 4
Window of overhaul: 4
Input interface: Stem tap signals or Level signal or 12V pulse signal which pulse >100ms, current drive >10mA
Time of passing: 30-40 people/min
Time of wing open and lock: 1 second
Time required for state when power on: 3 seconds
Time required for reset when the faulty happen: 10 seconds
Transit speed: 30—40persons per minute
Working Environment: Indoor/Outdoor (with a tent over)
Temperature: 10 below degree to 50 degree
Humidity: ≤90% (no glance)